Exhibition

Titanium rod production technical requirements:

Titanium rod has good physical and chemical properties, low density, light weight, non-magnetic, high strength, good corrosion resistance, which has good mechanical properties and welding performance, Baoji titanium rod is widely used in chemical equipment, Desalination, ship parts, electroplating industry, titanium corrosion resistance is generally 10 times the stainless steel, and titanium metal is relatively low rejection of the metal, so the processing of medical titanium rods, widely used in human implantation and medical equipment use.


Titanium rod production technical requirements:

1, titanium and titanium alloy bar chemical composition should be consistent with the provisions of GB / T 3620.1, the need to re-inspection, the chemical composition of the allowable deviation should be consistent with the provisions of GB / T 3620.2.

2, the diameter or side of the thermal processing rod and its allowable deviation should be consistent with the provisions of Table 1.

3, after the thermal processing by the car (grinding) light bar and cold-rolled, cold drawn bar diameter to allow deviation should be consistent with the provisions.


4, after the heat processing by the car (grinding) light rod bar length should not be greater than half the size of its tolerance.

5, the processing of the bar length of the length of 300-6000mm, the state of the bar bar length of 300-2000mm, length or length should be within the length of the length of the range